Filter
Top Products
60
Installation and Adjustment
When selecting Content of settings
To make a soft outline Toward step 1
To make a normal outline Centered (step 5)
To make a sharp outline To the right (toward
step 8)
1
4
2, 3
1
Press the MENU button, then select
PRINTER SETUP menu by pressing
the ı or ∫ button.
Switch PRN to green by pressing
the ı or ∫ button. PRINTER
SETUP menu appears.
4 Press the MENU button.
The regular screen appears.
Adjusting the tone of the printout
You can adjust the tone so that the details in the white or black part is clearly
printed.
Setting Up the Printer (continued)
The number and the corresponding
sharpness increase every time you
press the ∫ button.
The number and the corresponding
sharpness decrease every time you
press the ı button.
3 Select the desired sharperss by pressing
the ı or ∫ button.
You can set the sharpness to any of 8
steps from 1 to 8. A setting of step 5
corresponds to the standard sharpness.
PICTURE AD J US T COL OR
:
nnn
/ PI X / LAY / PRN / I N /OUT /
Q 1 A
1
S
SHARPNESS
1~82
PR I N TER SET UP COL OR n n n
/ PI X / LAY /PRN/ I N /OUT /
Q 1 A
1
S
1 1~9
SYSTEM PRE SS
PR I NT QTY
GAMMA D/ NORMAL /L
FUNCT ION PRESS