Sony UP-2100SD Printer User Manual


 
73
Others
Others
Precautions
Safety
Operate the printer using the power source specified in “Specifications”
(page 75)
Be careful not to damage the power cable by placing or dropping heavy objects
on it; it is dangerous to use the unit with a damaged power cable.
If you do not intend to use the unit for a long time, disconnect the power cable.
Unplug the power cable by grasping the plug, not the cable itself.
Do not disassemble the unit.
Do not remove the cover. There is a danger of electric shock from the internal
parts.
Be careful not to spill water or other liquids on the unit, or to allow combustible
or metallic material to enter the cabinet. If used with foreign matter in the
cabinet, the unit is liable to fail, or present a risk of fire or electric shock.
Ventilation holes are provided to prevent the unit from overheating. Be careful
not to obstruct them with other units or by covering the unit with a cloth etc.
If the unit malfunctions or if a foreign body falls into the cabinet, disconnect the
power immediately and consult your Sony service facility or your Sony dealer.
Installation
Avoid placing the unit in a location subject to:
mechanical vibration
high humidity
excessive dust
direct or excessive sunlight
extremely high or low temperatures
Do not use other electronic equipment near the unit. The unit will not work
properly in strong electromagnetic fields.
Do not place a heavy object such as a monitor on the printer.
Condensation
If the printer is subject to wide and sudden changes in temperature, such as when
it is moved from a cold room to a warm room or when it is left in a room with a
heater that tends to produce large amounts of moisture, condensation may form
inside the printer. In such cases the printer will probably not work properly, and
may even develop a fault if you persist in using it. If condensation forms, turn off
the power and leave the printer to stand for at least one hour.
If the printing pack is subjected to wide and sudden changes in temperature,
condensation may form on the ink ribbon or paper. This will cause the printer to
malfunction. Also, if the printing pack is used in this state, spots are likely to
appear on the printout. Therefore, avoid storing the printing pack in locations
subject to wide and sudden changes of temperature.
To store a half-used printing pack, replace it in its original packing and reseal the
package. If possible, keep the sealed printing pack in a cool, dark location. To
subsequently use the printing pack, place it, in its sealed package, in a warm
room for several hours. Doing so prevents condensation from forming when the
printing pack is removed from its package.