Filter
Top Products
53
Installation and Adjustment
Connections
To enable printing, video equipment to act as an input signal source, and a video
monitor to display images or menus must be connected.
The following diagrams illustrate how to make the input, output and remote control
connections. Use this as a guide when connecting the necessary signals to and from
the equipment to be used for printing.
Notes
• Turn off the power of each device before attempting to make any connections.
• Connect the AC power cord last.
Making Connections for Storing Video Images
Connect the video equipment providing the video images to be printed.
Connect the video equipment which will be used in actual printing, using the
following diagram as a guide.
to AC IN
to wall outlet
75-ohm coaxial cable
with BNC connectors
UP-2100/2100SD
to VIDEO INPUT
Video equipment
to S-VIDEO INPUT
Connecting cable (with
DIN 4-pin connectors)
YC-15EV
to S-VIDEO output
connector
to composite video output
connector
INPUT
S-VIDEO VIDEO
~
AC IN
12
REMOTE
OUTPUT
S-VIDEO VIDEO
AC power cord
(supplied)