Filter
Top Products
35 VGX-XL100 Living Room Entertainment ComputerLiving
From the S/PDIF group box:
• Check the Enable Dolby Digital Live check box.
• Verify that AC3 is the option selected for Format.
• Verify that Enable Digital Output is checked in the S/PDIF group box.
5 Close the Sound Reality Control Panel and the Windows Control Panel.
Your 5.1 Surround Sound Speaker Setup is complete.
Speaker Setup Notes
• After the 5.1 channel sound is setup, sound will not be outputted through
the HDMI connection. To enable HDMI sound, uncheck the Enable Dolby
Digital Live check box and check/select the Enable HDMI Output check
box located on the Sound Reality Control Panel, Advanced tab. This will
disable the 5.1 channel sound output.
• Dolby Digital 5.1 must be selected for the audio output of the DVD from the
DVD menu.
Note: The VGX-XL100 does not support dts sound decoding.
Step 3: Connecting to the Internet
Wired Network
Use an RJ-45 connector cable. Connect one end to the Ethernet connector on
the computer and the other end to your cable or modem.
Note: If you are using an HDMI connection through a TV or an amplifier that
supports 5.1 sound, do the following:
• check Enable HDMI Output
•select AC3 for the format
• check Enable Digital Output