Filter
Top Products
VGX-XL100 Living Room Entertainment Computer 58
8 Install the upper cover. Install the cover and tighten the screws on the back.
9 Connect the power cord and the peripheral devices that were removed in Step
1 and turn on the power to this device.
10 Click the Start button and then point to All Programs, VAIO System
Information and then click VAIO System Information.
Make sure that System Memory displays the correct memory capacity. If the
memory capacity is correct, memory installation is complete. If the memory
capacity has not increased, remove the memory module after turning off the
power to this device, and repeat the procedure to properly install the memory
module again.
Remove Memory Module
Discharge static in your body by touching the metal inside this device, and
then press out and down on the clips on both of the memory slots. Carefully
lift the memory module out of the slot.
1