Filter
Top Products
GM29 INTEGRATOR’S MANUAL
118
LZT 123 7361 R1B
6.8 AT+CGQREQ Quality of Service Profile (Requested)
Allows the TE to specify a quality of service profile that is used when
the MS sends an activate PDP context request message to the network.
8 10000 (~22bits/s)
9 20000 (~44bits/s)
10 50000 (~111bits/s)
11 100000 (~0.22kbits/s)
12 200000 (~0.44kbits/s)
13 500000 (~1.11kbits/s)
14 1000000 (~2.2kbits/s)
15 2000000 (~4.4kbits/s)
16 5000000 (~11.1kbits/s)
17 10000000 (~22kbits/s)
18 20000000 (~44kbits/s)
31 50000000 (~111kbits/s)
<mean> Description
Description Command Possible Responses
Set quality of
service profile
+CGQREQ=[<cid>
[,<precedence>
[,<delay>
[,<reliability>
[,<peak>
[,<mean>]]]]]]
• +CME ERROR: <err>
•OK
• ERROR
Read the
command
+CGQREQ? • +CGQREQ: <cid>, <precedence>,
<delay>, <reliability>, <peak>,
<mean>[<CR><LF>+CGQREQ: <cid>,
<precedence>, <delay>, <reliability>,
<peak>, <mean>[…]]
•OK
• ERROR
Test if the
command is
supported
+CGQREQ=? • +CGQREQ: <PDP_type>,
(list of supported <precedence>s),
(list of supported <delay>s),
(list of supported <reliability>s),
(list of supported <peak>s),
(list of supported <mean>s)
[<CR><LF>+CGQREQ: <PDP_type>,
(list of supported <precedence>s), (list of
supported <delay>s),
(list of supported <reliability>s),
(list of supported <peak>s),
(list of supported <mean>s)[…]]
•OK
• ERROR