Filter
Top Products
215
LZT 123 7361 R1B
15. SIM Application Toolkit
15.1 AT+CPIN PIN Control
See 3.23, AT+CPIN PIN Control
15.2 AT*E2STKS SIM Application Toolkit Settings
Allows the external application to disable or enable the presentation of
the unsolicited result codes corresponding to the STK commands.
Parameter <on_off> is used to disable or enable the presentation of an
unsolicited result code *E2STK. Setting chosen is stored internally so
that it is not necessary to change it each time the ME is switched on.
If the presentation of the unsolicited result codes is disabled, the
messages below are not sent to the application.
The unsolicited result codes shall be disabled by default.
Unsolicited Result Codes:
The unsolicited result codes defined in sections below can be received.
Description Command Possible responses
Set the presentation of the
unsolicited result codes
corresponding to STK
AT*E2STKS=<on_off> • +CME ERROR <err>
•OK
•ERROR
Read the current status of the
presentation of the unsolicited
result codes
AT*E2STKS? • *E2STKS: <on_off>
• +CME ERROR <err>
•OK
•ERROR
Test if the command is
supported
AT*E2STKS=? • *E2STKD: list of
supported <on_off>
• +CME ERROR <err>
•OK
•ERROR
<on_off> Description
0 Disable the presentation of the unsolicited result codes related to STK.
Default value
1 Enable the presentation of the unsolicited result codes related to STK