Filter
Top Products
13. SHORT MESSAGE SERVICES - POINT TO POINT
207
LZT 123 7361 R1B
13.13 AT+CMGD Delete Message
Common for both PDU and Text modes
Deletes message from preferred message storage <mem1> location
<index>. If deleting fails, final result code +CMS ERROR: <err> is
returned. Test command shows the valid memory locations.
13.14 AT+CSDH Show Text Mode Parameters
Only Applicable to Text Mode
Controls whether detailed header information is shown in text mode
result codes
.
Description Command Possible Responses
Delete message AT+CMGD=<index> • +CMS ERROR: <err>
•OK
• ERROR
Show if the command is
supported
AT +C M GD =? •OK
• ERROR
<index> Description
Integer type Value in the range of location numbers supported by the associated
memory
Description Command Possible Responses
Set the show text mode AT+CSDH=[<show>] • +CME ERROR: <err>
•OK
Display current settings AT+CSDH? • +CSDH: <show>
• +CME ERROR: <err>
Show if the command is
supported
AT+CSDH=? • +CSDH: (list of
supported <show>s)
•OK
• +CME ERROR: <err>
<show> Description
0 Do not show header values defined in commands AT+CSCA and
AT+CSMP (<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor
<length>, <toda> or <tooa> in +CMT, +CMGL, +CMGR result codes
for SMS-DELIVERs and SMS-SUBMITs in text mode; for SMS-
COMMANDs in +CMGR result code, do not show <pid>, <mn>,
<da>, <toda>, <length> or <cdata>
1 Show the values in result codes