Filter
Top Products
GM29 INTEGRATOR’S MANUAL
64
LZT 123 7361 R1B
2.5 ATO Return to Online Data Mode
Switch to the on-line data mode from the on-line command mode during
an active call. Returns ERROR when not in on-line command mode.
2.6 ATP Select Pulse Dialling
Command is ignored, and is implemented for compatibility only. It
would normally cause the next D command to use pulses when dialling
the number.
2.7 ATT Select Tone Dialling
Command is ignored, and is implemented for compatibility only. It
would normally cause the next D command to use tones when dialling
the number.
Description Command Possible Responses
Return to on-line data mode ATO[<value>] • CONNECT
• CONNECT <text>
• NO CARRIER
• ERROR
<value> Description
0 Return to on-line data state from on-line command
Description Command Possible Responses
Select pulse dialling AT P OK
Show if the command is
supported?
ATP =? OK
Description Command Possible Responses
Select tone dialling ATT OK
Show if the command is
supported?
ATT =? OK