Filter
Top Products
10. INTERFACE
137
LZT 123 7361 R1B
10.6 ATE Command Echo
The setting of this parameter determines whether or not the DCE echoes
characters received from the DTE during command state and online
command state.
10.7 ATV DCE Response Format
Select either descriptive or numeric response codes. The ATV
command sets the verbose numeric response codes and strips off the
<S3><S4> additions to the command response.
Description Command Possible Responses
Request Command Echo ATE[<value>]
ATE=[<value>]
•OK
• ERROR
Show the current setting AT E? <value>
Show if the command is
supported
AT E= ? E: (list of supported
<value>s)
<value> Description
0 DCE does not echo characters during command state and online command
state
1 DCE echoes characters during command state and online command state.
Default value
Description Command Possible Responses
Set DCE response format ATV[=]<value> •OK
• ERROR
Read the current setting ATV ? V: <value>
Show if the command is
supported
AT V= ? V: (list of supported
<value>s)
<value> Description
0 Display numeric result codes
1 Display verbose result codes. Default value