Filter
Top Products
69
LZT 123 7361 R1B
3. Control and Status
3.1 ATQ Result Code Suppression
Determines whether or not the DCE transmits result codes to the DTE.
When result codes are being suppressed, no portion of any intermediate,
final, or unsolicited result code - header, result text, line terminator, or
trailer - is transmitted.
3.2 ATS0 Automatic Answer Control
Defines the automatic answering feature of the modem. A non-zero
value specifies the number of rings before the call is answered.
Note! Call is always answered in the current fax class, regardless of whether
the incoming call is voice, data, or fax.
Description Command Possible Responses
Set Result Code
Suppression
ATQ[=]<value> •OK
• ERROR
Read the current setting ATQ ? Q: <value>
Show if the command is
supported
AT Q= ? Q: (list of supported
<value>s)
<value> Description
0 DCE transmits result codes. Default value
1 Result codes are suppressed and not transmitted
Description Command Possible Responses
Automatic answer control ATS0=[<rcnt>] •OK
• ERROR
Read the current setting ATS 0? <rcnt>
Show if the command is
supported
AT S0 = ? S0: (list of supported
<rcnt>s)
<rcnt> Description
0 Disable automatic answer. Default value
1-7 Answer after the specified number of rings