Filter
Top Products
GM29 INTEGRATOR’S MANUAL
142
LZT 123 7361 R1B
No flow control is enabled in any of the command modes.
10.13 AT+ILRR Cable Interface Local Rate Reporting
Specifies whether or not the extended-format “+ILRR:<rate>”
information text is transmitted from the DCE to the DTE. The <rate>
reported shall represent the current (negotiated or renegotiated) DTE-
DCE rate. If enabled, the intermediate result code is transmitted after
any modulation, error control or data compression reports are
transmitted, and before any final result code (e.g. CONNECT) is
transmitted. The <rate> is applied after the final result code is
transmitted.
<by_te> Description
0 No flow control on DTE
1 Xon/Xoff flow control on DCE. Control characters are removed by the
DCE interface
2 RTS flow control on DCE. Default value
3 Xon/Xoff flow control on DCE. Control characters are passed to the
remote DCE/DTE
<by_ta> Description
0 No flow control on DCE
1 Xon/Xoff flow control on DTE
2 CTS flow control on DCE. Default value
Description Command Possible Responses
Defines DTE-DCE
character framing
AT+ILRR=<value> •OK
• ERROR
Read the current setting AT+ILRR? +ILRR:<value>
Show if the command is
supported
AT+ILRR=? +ILRR:(list of supported
<values>s)
<value> Description
0 Disables reporting of local port rate (+ILRR: is not transmitted).
Default value
1 Enables reporting of local port rate (+ILRR: is transmitted)