Filter
Top Products
GM29 INTEGRATOR’S MANUAL
80
LZT 123 7361 R1B
3.19 AT+CLAC List all available AT Commands
Causes the ME to return one or more lines of AT commands. This
command has the same functionality as AT*.
Note! This command only returns the AT commands that are available to the
user.
3.20 AT+CMEE Mobile Equipment Error
Disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME. When
enabled, ME related errors cause +CME ERROR: <err> final result
code instead of the regular ERROR final result code. ERROR is
returned normally when error is related to syntax, invalid parameters, or
TA functionality. For more information, refer to “+CME ERROR
(Mobile Equipment Error Code)”, page 57.
Command Possible Responses
+CLAC <AT Command1> [<CR> <LF> <AT Command2>[…]]
+CME ERROR: <err>
+CLAC=? +CME ERROR: <err>
Description Command Possible Responses
Request GSM Mobile
Equipment Error Control
AT+CMEE=[<n>] •OK
• ERROR
Read the command AT+ CM EE? •+CMEE: <n>
•OK
• ERROR
Show if the command is
supported
AT+ CM EE =? • +CMEE: (list of
supported <n>s)
•OK
• ERROR
<n> Description
0 Disable +CME ERROR: <err> result code and use ERROR instead.
Default value
1 Enable +CME ERROR: <err> result code and use numeric <err>
values (see page 57)
2 Enable +CME ERROR: <err> result code and use verbose <err>
values (see page 57)