Filter
Top Products
GM29 INTEGRATOR’S MANUAL
226
LZT 123 7361 R1B
15.8 AT*E2STKN M2M STK Envelope (Menu Selection)
The application informs the ME about the selected menu item by means
of the AT*E2SKTN command. The ME answers with OK, or ERROR.
The Do command allows the external application to select the menu
item in the item list that was created by means of the SET-UP MENU
command.
15.9 AT*E2STKC M2M STK Set Up Call
The ME passes the parameters within SET UP CALL command to the
external application by means of the unsolicited result code *E2STKC,
so that it takes up the decision on progressing or rejecting the call.
Answer command allows the external application to send the
appropriate answer after receiving the unsolicited result code, and
before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is generated.
Description Command Possible responses
Do the menu
selection
AT*E2STKN=<sel_item> • +CME ERROR <err>
•OK
• ERROR
Test if the
command is
supported
AT*E2STKN=? • *E2STKN: (list of supported
<sel_item>)
• +CME ERROR <err>
•OK
• ERROR
<sel_item> Description
Integer type The identifier is a single byte between 1 and 255. It identifies the
selected menu item corresponding to SET-UP MENU command.
Values follow the definition described in GSM 11.14
Description Command Possible responses
Answer to the
reception of SET UP
CALL
AT*E2STKC=<answer> • +CME ERROR <err>
•OK
• ERROR
Test if the command is
supported
AT*E2STKC=? • *E2STKC: (list of supported
<answer>)
• +CME ERROR <err>
•OK
• ERROR