Filter
Top Products
3. CONTROL AND STATUS
85
LZT 123 7361 R1B
Test command returns a list of pairs which present the available
facilities and the maximum length of their password.
<fac> Description
“PS” PH-SIM (lock PHone to SIM card) (ME asks password when other
than current SIM card inserted)
“SC” SIM (lock SIM card) (SIM asks password in ME power-up and when
this lock command issued)
“P2” SIM PIN2
“AO” BAOC (Barr All Outgoing Calls) (refer GSM 02.88 clause 1)
“OI” BOIC (Barr Outgoing International Calls) (refer GSM 02.88 clause 1)
“AI” BAIC (Barr All Incoming Calls) (refer GSM 02.88 clause 2)
“IR” BIC-Roam (Bar Incoming Calls when Roaming outside the home
country) (refer GSM 02.88 clause 2)
“OX” BOIC-exHC (Barr Outgoing International Calls except to Home
Country) (refer GSM 02.88 clause 1)
“AB” All Barring services (refer GSM 02.30)
“AG” All outGoing barring services (refer GSM 02.30)
“AC” All inComing barring services (refer GSM 02.30)
<oldpwd> Description
string type <oldpwd> shall be the same as password specified for the facility from
the ME user interface or with the change password command,
+CPWD
<newpwd> Description
string type <newpwd> is the new password, maximum length of password can be
determined with <pwdlength>
<pwdlength> Description
Integer type Maximum length of the password for the facility
<err> Description
0 Phone failure
3 Operation not allowed
5 PH-SIM PIN required
10 SIM not inserted
11 SIM PIN required
12 SIM PUK required
13 SIM failure