SiS VGA Driver Installation SY-5STM
100
6-9 IBM OS/2 Warp 3.0 (Double Byte Character)
OS/2 Version Notes
1. The following description applies to “Double Byte Character IBM
OS/2 Warp 3.0” only. (i.e. Chinese, Japanese, Korean etc.)
2. For Single Byte Character Versions IBM OS/2 Warp 3.0
installation, please refer to the next section.
Driver Files
The enclosed SiS 5597/5598 Double Byte OS/2 driver contains the
following files:
Ø SETUP.CMD Program to install SiS drivers
Ø SVGA.EXE SiS PMI generator
Ø S768256.DL@ SiS IBMDEV32.DLL display driver
Ø OTHERS Other files required for installation.
Installation
For Double Byte OS/2 Warp limitation, the installation process is a
two-phase installation. The installation cannot be completed in one
step process.
Ø 1st phase: Copy files, modify “ config.sys”, “ create “ SiS
Install” icon , then shutdown and re-boot OS/2.
Ø 2nd phase: Double clicks “ SiS Install” icon to complete the
installation.
Before installing SiS 5597/5598 OS/2 drivers, make sure you:
1. Install an OS/2 system using “VGA display” option (i.e.
standard VGA).
2. Start your OS/2 system.