Filter
Top Products
Introduction SY-5STM
29
1-2 UNPACKING THE MAINBOARD
When unpacking the mainboard, check for the following items:
Ø The SY-5STM SiS 5598 PCI Mainboard
Ø This Quick Start Guide *
Ø The Installation CD-ROM *
Ø One IDE Device Flat Cable
Ø One Floppy Disk Drive Flat Cable
Ø One 9-pin External Serial Connector with 9-pin Flat Cable
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the mainboard from its anti-static
packaging until you are ready to install it.
1-3 HANDLING THE MAINBOARD
To avoid damage to your mainboard, follow these simple rules while
unpacking:
Ø Before handling the mainboard, ground yourself by grasping an
unpainted portion of the system's metal chassis.
Ø Remove the mainboard from its anti-static packaging. Hold the
mainboard by the edges and avoid touching its components.
Ø Check the mainboard for damage. If any chip appears loose,
press carefully to seat it firmly in its socket.
Warning: Do not apply power if the mainboard appears
damaged. If there is damage to the board, contact your
dealer immediately.