SOYO SY-5S Computer Hardware User Manual


 
SiS VGA Driver Installation SY-5STM
101
Install SiS 5597/5598 OS/2 Warp drivers according to the following
procedures:
1st phase:
1. Enter OS/2 window or OS/2 full screen.
2. Change directory to which holds the SiS 5597/5598 OS/2 3.0
display drivers and type SETUP <Enter>. For example,
D:\>SOYO_CD\REV_10\UTILITY\SIS_VGA\OS2\DBCS30\SET
UP.
3. All the Driver Files will be copied to a sub-directory C:\SISDRV
and an SiS Install icon will be created.
4. After completing setup program, shutdown and re-boot OS/2.
2nd phase:
5. After re-booting OS/2, double clicks SiS Install icon. The SiS
Install icon would be executed automatically and Select
Screen parameters for SiS SVGA screen will appeared on the
screen.
6. Select the desired resolution (and color) and frame rate on this
screen, then click OK to complete installation. The SiS Setup
icon will be created for future change modes and frame rate
usage.
7. After completing installation, shutdown and re-boot OS/2 to
make your selection effective.