Filter
Top Products
Quick Installation Guide SY-5STM
5
QUICK INSTALLATION GUIDE
Congratulations on your purchase of SY-5STM Mainboard. You are
about to install and connect your new mainboard.
Note: Do not unpack the mainboard from its protective
anti-static packaging until you have made the following
preparations.
PREPARATIONS
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1. Pentium processor with CPU cooling fan.
2. DIMM memory module
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. Keyboard
6. Pointing Device (PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive…
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Modem and LAN cards (optional)
Frequently Asked Questions:
l Do I need to install a VGA card?
l Do I also need to install a sound card?
The answer is NO to both questions above, since, for your
convenience, the SY-5STM mainboard already features one built-in
VGA port and three built-in audio-stereo ports (Line-in, Line-out,
Microphone).
Notice: If you plan on using the onboard VGA and intend to install
only one DRAM memory module, then this single DRAM must be
installed in bank DIMM1.
l What kind of speaker can connect to "Line-out" port?
This motherboard requires a speaker with built-in amplifier to
generate proper output sound volume.