Filter
Top Products
SiS VGA Driver Installation SY-5STM
85
6-3 Autodesk ADI 4.2 Protected Mode
6-3.1 General Description
Driver Files
1. The enclosed CD-ROM contains the following SiS 5597/5598
ADI file: RCPSIS.EXP SiS ADI driver (for all resolutions &
colors).
Note:
This version of the ADI driver does not support 16-color operation.
2. This driver fits for a series of Autodesk Inc. products including:
Ø AutoCAD/386 R11
Ø AutoCAD/386 R12
Ø AutoShade/386 B2.0
Ø 3D Studio V3.0
3. Their installation procedures are different from program to
program. The first step of installation is the same for all these
programs. Make sure you unpack and copy drivers to where you
would like them to reside.
4. A detailed description of the installation procedures for each
program is given in Sec. 1.2.2 to Sec. 1.2.5.
Unpack & Copy
To unpack and copy drivers please perform the following
procedures:
1. Run “ INSTDRV.EXE” where it resides. For example,
D:\>SOYO_CD\REV_10\UTILITY\SIS_VGA\DOS\INSTDRV
<Enter> (assuming INSTDRV.EXE resides in CD-ROM “D” )
2. In SiS’ s Super VGA Driver Installation menu, select “ A. ADI 4.2”
to unpack and copy drivers. (To select, type “ A”)