Filter
Top Products
SiS VGA Driver Installation SY-5STM
87
6-3.3 AutoCAD R12 Setup
1. The following procedures assume that
Ø You have completed the unpacking & copy procedure.
Ø Your SiS ADI 4.2 drivers are located in C:\ADI42.
Ø Your AutoCAD R12 program is located in C:\ACADR12.
Ø Your AutoCAD R12 default drivers are located in
C:\ACADR12\DRV.
Ø Your AutoCAD R12 configure file ACAD.CFG is located in
C:\ACADR12.
2. Copy the RCPSIS.EXP driver file to C:\ACADR12\DRV. You
may complete this step with the following command:
COPY C:\ADI42\RCPSIS.EXP C:\ACADR12\DRV
3. Delete your original ACAD.CFG file. You may complete this step
with the following command:
DEL C:\ACADR12\ACAD.CFG
4. Restart your AutoCAD R12 program as usual.
5. AutoCAD R12 will ask you to complete the configuration
procedures since it cannot find the configuration file
ACAD.CFG.
6. Follow the instructions of AutoCAD R12 to proceed with
configuration.
7. In “Available Video Displays:” item, choose the “SiS Super VGA
ADI v4.2 Display and Rendering driver” item.
8. In “Select Display Resolution” screen, choose which display
driver you want to use.
9. Perform the listed instructions and the system will start with the
selected display setting.