Filter
Top Products
l Press [c] until you see
CHARACTER
l Press [v], which displays
SOURCE R (or SOURCE C or SOURCE S)@
(SOURCE R means Resident, SOURCE C for Cartridge, and SOURCE S
for Soft font)
l Press [v] displays
NUMBER l@
l Pressing [v] again gives various options for SYMBOL SET.
l Pressing [c] until you see the desired one.
l Then press [v].
l Press [ON LINE].
4.9 SELECTING DISPLAY LANGUAGE
The language for display can be selected from English, French, German,
Italian or Spanish. To select the display language, turn off the printer then
follow the procedure below.
1, Hold down [RESET/v] and turn on the printer (make sure that [RESET/v]
is held at least until the screen displays “SELECT LANGUAGE”). The screen
displays
SELECT LANGUAGE
-
Memory Test 1 MB
ENGLISH@
2. Pressing [ERROR SKIP/e] or [TEST/>] changes the language as displayed
in the screen.
-
3. Press [ON LINE] after selecting new language. The language will be saved
and the printer goes On Line.
If [RESET/v] is released before “SELECT LANGUAGE” message is displayed,
the printer will not enter the display language mode (i.e. normal startup
operation will be carried out). The factory setting of display language is
English.
56