Filter
Top Products
3) When you have completed, type [Q]uit, then [Ulpdate. The l-2-3 will
save your selections and use these defaults when printing.
Now, you are ready to use your Star LaserPrinter 4111.
6.2 WORDPERFECT VERSION 5.0
WordPerfect must be installed before you can select a printer. Refer to the
“Installation” section in your WordPerfect Manual. Once this is done, follow
the procedure below to select a printer.
1) Press [Shift] and [F7], then select [S] Select Printer.
2) Select [2] Additional Printers, which displays the Select Printer screen.
3) From the list of defined printers, select either HP LaserJet IIP or HP
LaserJet II, then press [RETURN].
4) Press [RETURN] to accept the displayed printer filename or enter a new
name, then press [F7] Exit. The Se!ect Printer: Edit screen will be dis-
played.
5) Now you must specify the interface connection. Select [2] Port at the
Select Printer: Edit menu, which displays a list of ports.
6) If you are using a parallel interface, for LPTl, type “1”.
7) If you are using a serial interface, for COM 1, type “4”. The WordPerfect
will display the Select Printer: COM port menu.
You must now specify the serial parameters, including baud rate, parity, stop
bits, character length and XON/X
OFF function. Be sure that you specify the
same values in WordPerfect as you do for the Star LaserPrinter 4111. To save
your WordPerfect selections, press [F7] to exit the program.
64