Filter
Top Products
-
l Do not store the cartridge where it will be exposed to direct sunlight.
l Store the cartridge with the label facing up. Do not turn it upside down or
stand it on end.
l Store the cartridge at a temperature of between 0°C and 35°C (32°F and
95°F).
l Do not store the cartridge in salty air, or where there are corrosive gases
-~
such as ammonia.
l Keep the cartridge away from CRTs, disk drives and floppy disks. The
magnet in the cartridge can adversely affect them.
l Always keep the cartridge away from children.
l Be sure to use the cartridge before its expiration date. Otherwise, print
quality will be affected.
When handling the EP-L cartridge, also pay attention to the following points,
in addition to the above.
l Do not touch the bottom of the cartridge when handling the cartridge.
l Do not open the drum protective shutter. If it is opened, print quality may
be affected.
7.3 CLEANING THE FIXING ASSEMBLY
Transparency films may sometimes show stain problem at either the top or
bottom of the films. This problem may be caused by a dirty paper path or the
-
flaw on the EP-L cartridge. In this case, clean the fixing assembly, and
replace the EP-L cartridge if necessary. Regular cleaning of the fixing
assembly will reduce the possibility of paper jam and will prolong the life of
-
the printer. The fixing assembly can be cleaned using cleaning paper.
-
First print a sheet of “CLEANING PAPER” on letter, A4, or legal size paper
according to the following procedure (see “3.2.1 Printing Test Sheets”).
1) Hold the [TEST] button until the screen displays “CLEANING PAPER”.
2) Releasing the button will produce a cleaning paper. When the cleaning
paper is produced, the screen displays “MP LOAD THE PAP”.
70