Star Micronics Dot Impact Printer Printer User Manual


  Open as PDF
of 104
 
6-3STARCommandSpecications
Rev. 0.70
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
Others RS ○ ○ ○ ○ ○
CAN ○ ○ ○ ○ ○
DC3 ○ ○ ○ ○ ○
DC1 ○ ○ ○ ○ ○
ESC @ ○ ○ ○ ○ ○
ESC U ○ ○ ○ ○ ○
ESC GS # - - ○ ○ ○
ESC # ○ ○ Ignored Ignored Ignored
ESC ? ○ ○ ○ ○ ○
• Black Mark Related Commands
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
Black mark
Related
Commands
ESC d (Note 3) - - ○ ○ ○
FF (Note 3) - - ○ ○ ○
ESC FF - -
○ ○ ○
ESC GS ( F - -
○ ○ ○
ESC RS m - - - ○ ○
• USB Related Commands
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
USB
Related
Commands
• 2-Color Printing Related Commands
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
2-Color Printing
Related
Commands
ESC RS C - - - - ○
ESC 4 - - - - ○
ESC 5 - - - - ○
(Note 1) Kanji characters
• Δ: Enabled only on printer models equipped with Kanji characters.
• Japanese character control commands are ignored on models not installed with Japa-
nese character fonts.
• Japanese character control commands are ignored if the specication for the location of
use is specied as SBCS (single byte countries) by the memory switch.
(Note 2)
Red/black substitute function can be selected by the memory switch. Refer to each print-
er’s specication manual.
Red/black substitute function can be selected by the command ESC GS 4.
(Note 3)
These are commands whose operation specications vary when the black mark function
is enabled.
(Note 9)
Ignored command when using Ethernet or wireless LAN.
 previous