A SERVICE OF

logo

3-53STARCommandSpecications
Rev. 0.70
ESC GS EM DC2 m n1 n2
[Name] Executeexternalbuzzerdrive
[Code] ASCII ESC GS EM DC2 m n1 n2
Hexadecimal 1B 1D 19 12 m n1 n2
Decimal 27 29 25 18 m n1 n2
[DenedArea] 1≤ m 2 49 m 50
1 n1 20
n2 = 0
[Initial Value] ---
[Function] RepeatedlydrivesthebuzzeraccordingtotheON/OFFconditionssetbytheexternalbuzzerdrivepulse
conditioncommand<ESC><GS><EM><DC1>mt1t2.
mspeciesthebuzzerdriveterminaltodrive.
m Buzzer Drive Terminals
1, 49 Buzzer drive terminal 1
2, 50 Buzzer drive terminal 2
Speciesthenumberoftimestorepeatbuzzerdrivewith(n2x256+n1).
Buzzer cannot ring whle printer is printing.
Thiscommandisprohibitedforuseforanythingotherthanringingthebuzzer.
(When this command is used for the drawer drive on models equipped with an external device terminal, it will
bedamaged,soitisabsolutelyprohibited.)
Thebuzzercanbestoppedbypressingthepaperfeedswitchwhileitisringing.
Ex.
ProhibitPrinting,PaperFeed
(Note) When off time = 0, it is possibletoringthebuzzercontinuouslyforonlytheamountofn1.
For example, if on = 5 seconds, and off = 0, n1 = 20times,thebuzzerwillringfor100seconds.
OFF
ON
Drive Pulse
Print Operation
on
off
n1 = 8