A SERVICE OF

logo

Open as PDF
next previous
3-49
STARCommandSpecications
Rev. 0.70
3-3-12 External Device Drive
ESC BEL n1 n2
[Name] Set external drive device 1 pulse width
[Code] ASCII ESC BEL n1 n2
Hexadecimal 1B 07 n1 n2
Decimal 27 7 n1 n2
[DenedArea] 1≤ n1 ≤ 127
1 ≤ n2 ≤ 127
[Initial Value] n1 = 20 (Energizing time: 200 msec)
n2 = 20 (Delay time: 200 msec)
[Function] Sets the energizing and delay times for drive of the external device (such as cash drawers).
• Energizing time = 10 x n1 (ms)
• Delay time = 10 x n2 (ms)
Afterprinting,thisisexecutedbyBEL(Externaldevice1driveinstruction)orFS(Externaldevice1drive
instruction (real time)).
Handled in the following way when n1 and n2 are out of range.
• When n1 = 0, or n2 = 0, this command is ingored.
•Whenn1>128,n=128,whenn2>128,n=128.
10 x n2 (msec)
10 x n1 (msec)
ProhibitPrinting,PaperFeed
(Energize Time)
(Delay Time)
OFF
ON
Drive Pulse
Print Operation