Star Micronics Dot Impact Printer Printer User Manual


  Open as PDF
of 104
 
3-80STARCommandSpecications
Rev. 0.70
3-6 2-Color Printing Command Details
ESC RS C n
[Name] Select/cancel 2-color printing mode
[Code] ASCII ESC RS C n
Hexadecimal 1B 1E 43 n
Decimal 27 30 67 n
[DenedArea] 0≤ n ≤ 1
48 ≤ n ≤49(“0”≤ n ≤“1”)
[Initial Value] DIP switch
[Function]
n Select/cancel 2-color printing mode
0, 48 Cancel 2-color printing mode
When in two-color print mode, this command cancels 2-color printing mode.
This command is ignored when the 2-color print mode is already cancelled.
ThespecicationofthiscommandisnotclearedbyESC@CAN.
Thefollowingprocessesareexecutedbycancelingthe2-colorprintmodeusingthiscommand.
•Printsdatainlinebufferin2-colorprintmode,ifunprinteddataexistsinthelinebuffer.
• Waits to stop printing when printing in 2-color print mode.
1, 49 Select 2-color printing mode
This command selects 2-color print mode, when in single color print mode.
This command is ignored already in the 2-color print mode.
ThespecicationofthiscommandisnotclearedbyESC@CAN.
Thefollowingprocessesareexecutedbyselectingthe2-colorprintmodeusingthiscommand.
•Printsdatainlinebufferinthesingle-colorprintmode,ifunprinteddataexistsinthelinebuffer.
• Waits to stop printing when printing in single-color print mode.
• Initializes print color setting (2-color print mode setting)
 previous next