Star Micronics Dot Impact Printer Printer User Manual


  Open as PDF
of 104
 
3-20STARCommandSpecications
Rev. 0.70
ESC A n
[Name] Denen/72inchpitchlinefeed
[Code] ASCII ESC A n
Hexadecimal 1B 41 n
Decimal 27 65 n
[DenedArea] 0≤ n ≤ 85
[Initial Value] n = 12 (1/6 inch line feed)
[Function] Deneslinefeedamountforonelineasn/72inch.
Toenablethiscode,ESC2(linefeedpitchsetting)mustbesent.
ESC 2
[Name] Set ESC A line feed pitch
[Code] ASCII ESC 2
Hexadecimal 1B 32
Decimal 27 50
[DenedArea] ---
[Initial Value] ---
[Function] SetsonelinefeedamounttothevaluedenedbyESCA(n/72inchpitchlinefeeddenition).
Line feed amount is set to 1/6 inch if executing this command when ESC A (n/72 inch pitch line feed
denition)isnotset.
 previous next