Star Micronics Dot Impact Printer Printer User Manual


  Open as PDF
of 104
 
3-23STARCommandSpecications
Rev. 0.70
3-3-5 Page Control Commands
FF
[Name] Form feed
[Code] ASCII FF
Hexadecimal 0C
Decimal 12
[DenedArea] ---
[Initial Value] ---
[Function] Thiscommandperformsthefollowingoperationsaftertheprinterprintstheprintingdatainthelinebuffer.
Operationsaresetbythememoryswitch.
Memory SW Cutter Model Tear Bar Model
Condition (1) Executes a form feed Executes a form feed.
Condition (2) Feeds paper to the cutting position and performs a full cut. (*1)
Paperisfedtothetear-barposition.(*2)
Condition (3) Executes a form feed. Executes a form feed.
Condition (4) Feeds paper to the cutting position and performs a partial cut. (*1)
Paperisfedtothetear-barposition.(*2)
(*1) Paper feed to cutting position: Executes a 1 inch paper feed.
(*2)Paperfeedtotear-barposition: Executesa7/6inchpaperfeed.
Seeeachprinter'sproductspecicationsmanualfordetailsonthememoryswitchsettings.
 previous next