Star Micronics Dot Impact Printer Printer User Manual


  Open as PDF
of 104
 
3-24STARCommandSpecications
Rev. 0.70
ESC C n
[Name] Set page length to n lines
[Code] ASCII ESC C n
Hexadecimal 1B 43 n
Decimal 27 67 n
[DenedArea] 1≤ n ≤ 255
[Initial Value] 1/6 inch x 42
[Function] This command sets the length of one page to [currently set line feed amount x n] lines
The current position is the top position of the page.
Thepagelengthsetusingthiscommandisunaffectedbychangingtheformfeedamountlater.
Moving to the top of the page is performed using the FF (form feed) command.
Ifapagelengthissetlessthanthebottommarginsettingvaluethatiscurrentlyset,thepagelengthsetting
valueisvalidandthebottommarginsettingvalueiscleared.
ESC C NUL n
[Name] Set page length to n inches
[Code] ASCII ESC C NUL n
Hexadecimal 1B 43 00 n
Decimal 27 67 0 n
[DenedArea] 1≤ n ≤ 127
[Initial Value] n = 7
[Function] This command sets the length of one page to n inches.The current position is the top position of the page.
Thepagelengthsetusingthiscommandisunaffectedbychangingtheformfeedamountlater.
Moving to the top of the page is performed using the FF (form feed) command.
Ifapagelengthissetlessthanthebottommarginsettingvaluethatiscurrentlyset,thepagelengthsetting
valueisvalidandthebottommarginsettingvalueiscleared.
 previous next