Filter
Top Products
SWITCH COMBINATION FUNCTIONS
Several additional functions can be achieved by pressing the control panel
buttons in combinations.
Topof form
Form feed
Bufferclear/All reset
Figure 4-5. Switch combination functions of control panel
Form feed
If you are using cut forms, this operation ejects the current page. If you are
using fanfold forms, it feeds to the top of the next page.
1.
2.
3.
Press the I
ON LINE
I button to set the printer off-line.
Press the I
PAPER FEED ]button and hold it down. The printer will start
performing successive line feeds.
While holding the [
PAPER FEED 1button down, press the I
ON LINE
1
button, then release both buttons at the same time. The printer will
smoothly eject the current page.
Top of form
When you power on theprinter, the top-of-form positionisautomatically set
to the current position.If this is not where you want the top ofthe page tobe,
you can change the top-of-foti position as follows:
1. Press the I
ON LINE
]
button to set the printer off-line.
2. Move the paper to the desired top-of-form position by pressing the
I
PAPER FEED ] button, or by performing aforward or reverse micro-feed.
3. Press and hold the I
ON LINE
]
button.
4. While holding the [
ON LINE
]
button down, press the EEEHl button,
then release both buttons at the same time. The “-–” message will show
on the LCD display, that the top-of-fonmposition has been set.
41