Filter
Top Products
OF THE EDS SETTINGS
The printer stores the parameters that you can select from the control panel
while in the EDS mode.
A defaultis the settingthat the printer will use if none is specifically selected
by aprogram. When you first turn on or laterreset your printer these default
settings will take effect. By changing the settings, you can alter various
printer functions to match your specific requirements. The following will
help you choose the proper settings.
BanI-Switch Function
ON
OFF
A-1
Emulation
STANDARD/EPSON
IBM
A-2
AEC Mode
Enabled
Disabled
A-3 RAM Usage
Input Buffer
Download Buffer
A-4 Auto LF with CR
Disabled
Enabled
A-5 Auto Sheet Feeder
Not installed
Iristalled
A-6
Graphics Direction
Bi-directional
Uni-directional
B-1 - (Not used)
B-2 Paper-out
Enabled ] Disabled
B-3 (Not used)
B-4 (Reserved)
Leave ON
B-5
Printable Area
Type A
I Type B
B-6 (Not used)
c-1
Print Mode
c-2
(See below)
c-3
c-4
Page Length
(See below)
c-5
D-1
Character Table
(Standard mode)
Graphics
Italics
(IBM mode)
Set #2
[ Set #l
D-2 IBM Code page or
D-3 International
(See below)
D-4 Character Set
D-5
CR Centering
Disabled
Enabled
E-1
E-2
E-3
LQ Font Selection
(See below)
E-4
E-5
F-1 EDS Setting
Current
Reset
NOTE: The factory default is the “ON” position for all functions except
A-6 which is set to the “OFF” position.
50