Filter
Top Products
LCD Message
ON OFF
Meaninm and action
Displays inthe EDS mode. Indicates the current statusof
the displayed EDS bank and switch number.
Press the I
EJECT/PARK]button to change the status.
Quiet mode is selected.
Press the 1
PAPER FEED Ibutton while in the on linemode
to return to the Normal mode.
Front panel setting are saved in the printer’s memory as
a “MACRO”.
Short print test mode is selected.
Long print test mode is selected.
Turn off the power switch to cancel the long print test
mode.
Print area test mode is selected.
Hexadecimal dump mode is selected.
Turn off the power switch to cancel the hexadecimal
dump mode.
Top of form is set manually with the control panel.
Buffer is cleared manually with the control panel.
Paper is not loaded to the printer.
Dot Adjustment mode is selected.
Bail lever is closed before the paper goes through the
location of the bail lever. Open the bail lever.
Release lever is moved while the paper is in printing
position.
The memory of EDS settings is accessed.
Print head error. Turn off theprinter and turn iton again.
Carriage home position error. Turn off the printer and
turn it on again.
Paper handling error. Turn off the printer and turn it on
again.
S.W.I. error. Turn off the printer and turn it on again.
RAM check error. Turn off the printer and turn it on
again.
Watch dogerror. Turn off the printer and turn iton again.
46