Filter
Top Products
Loading paper
1. Open the printer cover.
2. With the tractor covers open, guide the paper from the bottom of the
printer, by aligning holes with the pins on the tractor unit.
Figure 7-15.Mount the fanfold paper from the bottom ofthe printer.
3. Adjustthe spacingof thetractorunitsby slidingthemalong thebar, using
the clamp lever at the back of each unit to release and lock them in
position. When the lever is up, the unit isreleased, and when it is down,
the unit is locked.
4. Now close the tractor covers, again making sure that the paper holes are
aligned with thepinson thetractor units. If they are not aligned properly,
you will have problems with paper feeding, possibly resulting in tearing
and jamming of the paper.