Filter
Top Products
I
Switches C-3 to C-5: Page Length
Leave these switches ON if you will be using 1l-inch forms. You will
need to change the switches ifyou willbe using a different page length
as shown below:
Page Length
c-3
c-4
c-5
11 inches/Letter ON ON ON
8 inches OFF ON ON
11.7 inches/A4
ON
OFF ON
12 inches OFF OFF
ON
8.5 inches/Letter ON ON
OFF
14 inches/Legal OFF ON
OFF
10.5 inches/Executive
ON
OFF OFF
I 7.25 inchesiExecutivel OFF I OFF I OFF I
Switch D-1: Character Table
The action of this switch depends on the mode chosen with switch A-
1.
Move thisswitch OFF to selectItalic character tablewith the Standard/
Epson emulation mode. If you leave this switch to the ON position, in
place of italics you will get the graphic characters, international char-
acters, and mathematical symbols of IBM character set #2.
In the IBM emulation mode, ON selects character set #2, which has
international characters and fewer control words.
OFF selects character set #1, for computers with a 7-bit interface.
Switches D-2 to D-4: IBM Code Page or International Character Set
Except in the Standard Italic character set, these switches select the
default character code page as shown below:
IBM Code Page
D-2
D-3 D-4 IBMCodePage D-2
D-3 D-4
#437U.S.A.
ON
ON
ON K363CanadianFrenchON ON OFF
#850Multi-lingual
OFF ON
ON #865Nordic
OFF
ON OFF
#860Portuguese
ON OFF ON (Reserved)
ON
OFF OFF
#861Icelandic OFF
OFF
ON (Reserved)
OFF
OFF OFF