Filter
Top Products
Switch B-2: Paper-out
When this switch isOFF the printer ignoresthe paper-outdetector and
prints down to (and beyond) the bottom edge.
Switch B-4: This switch is used for technical purpose only. Leave this
switch ON.
Switch B-5: Printable area
This printer can usetwo types of printing area format for single sheets
(cut forms).
Byputting the switch ON (’<TypeA“), thetop ofthe first lineofprinting
willstart 1/6inchfrom thetop of thepaper, and theprinted area willend
1/6inch from the bottom of the paper.
By puttingthe switch OFF (“TypeB“),the firstlineofprintingwill start
at one inch from the top of the paper, and the printed area will end to
print 6 mm from the bottom of the printer.
Switches -C-l and C-2: Print Mode
These switches select the default print pitch and the fonts as shown
below.
Print Mode
c-l c-2
10CPIDRAFT
ON ON
10CPI HS DRAFT
ON
OFF
17CPI DRAFT
OFF ON
10CPI LQ
OFF OFF
NOTE: If you change these switches after you have saved a macro,
these new settings will override the macro setting.
52
.