Filter
Top Products
6. Lower the rear side of the Automatic Sheet Feeder and attach it to the
holder shaft.
7. Install the printer cover provided with the Automatic Sheet Feeder.
I
Figure 7-4.Installtheprintercover.
8. Insert the hopper attachment on top of the hopper support section as
shown in Figure 7-5.
I
Figure 7-5. Insertthe hopper attachment.
9. Insert the stackerattachment intothe holder onthe front part of the sheet
feeder.
NOTE: Theflat sideofthe attachment shouldbe locatedtotherear, asshown
in Figure 7-6.
Now, you can use the ASF by installing the paper stack into the hopper.