Filter
Top Products
112 Migrating to the latest version
Migrating legacy detection policy files
Table 5-2 lists the policy conversion utility command line switches.
Note: To check for additional supported arguments, run the policy conversion
utility without arguments, and browse Readme.txt on the installation CD.
The policy conversion utility processes legacy files in a source directory, and
places the converted files into a destination directory. All legacy files are placed
in one .zip file in the destination directory.
To convert legacy detection policy files
1 Create source and destination directories.
2 Copy your legacy .pol and .ini files to your source directory.
3 At a command prompt, change to the directory location of
ITAHIDSpolicyMigration.exe.
By default, ITAHIDSpolicyMigration.exe is installed in the following
directory:
C:\Program Files\Symantec\Critical System Protection\Console
Table 5-2 Command line switches
Switch Default setting Description
-p no switch (converts
policy files to policy
files)
Converts legacy detection policy files to
Symantec Critical System Protection detection
policy files, and creates option groups for the
policy so that you can see the policy rules with
the management console.
Optional
Recommended
-solaris no switch Converts Solaris policy files. Required for proper
Solaris policy file conversion.
-linux no switch Converts Linux policy files. Required for proper
Linux policy file conversion.
-aix no switch Converts IBM AIX policy files. Required for
proper AIX policy file conversion.
-hpux no switch Converts Hewlett Packard HP-UX policy files.
Required for proper HP-UX policy file
conversion.
-tru64 no switch Converts Hewlett Packard Tru64 policy files.
Required for proper Tru64 policy file conversion.