Filter
Top Products
106 XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
F113 AUX REF 1MHZ 50<CR><LF>
Or
F113 DISABLE<CR><LF>
To set the J3 Input Configuration, enter a character string using the same formats as the preceding
XLi responses. Only valid values are accepted.
For example, to enable an Aux Ref 5 MHz input frequency with 1 kΩ input impedance, enter:
F113 AUX REF 5MHZ 1K<CR>
Or, to disable F113, enter:
F113 DISABLE<CR>
To all of the above examples, the XLi responds:
OK<CR><LF>
F116 – Display Brightness Level
Use function F116 to adjust the brightness of the front panel display on a range from 1 to 10, with 1 being
the dimmest and 10 being the brightest.
Note: F116 is available from the keypad/display only. It is not available using the command line inter-
face.