Filter
Top Products
XLi IEEE 1588 Clock 189
997-01510-03, Rev. C, 12/12/2006
2
5
1
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
E: Time Code Formats
The following section provides a summary description of the three time code types used by the XLi. The
definitive IRIG time code specification, the Range Commanders Council’s IRIG Serial Time Code
Formats, IRIG Standard 200-98, is available on the Web at http://jcs.mil/RCC/manuals/200/
Overview
Please refer to the Input and Output specifications in the front of the manual for details regarding the
voltage amplitudes / modulation ratios of the following time codes provided or used by the Model XLi.
IRIG
Introduction
The document 200 95 "IRIG STANDARD TIME FORMATS" by the Telecommunications Working Group,
Inter range Instrumentation Group, Range Commanders Council describes IRIG-B and IRIG-A time
codes.
The standard time formats of IRIG codes were designed for use in missile, satellite and space research
programs. Use of these codes facilitates efficient interchange of test data. These formats are suitable
for recording on magnetic tape, oscillographs, film and for real time transmission in both automatic and
manual data reduction. IRIG-B from the Model XLi is suitable for remote display driving, magnetic tape
recording and many other uses. IRIG codes, in the strict sense, encode Universal Coordinated Time
(UTC) in 24 hour format and not local time. Nonetheless, this instrument can encode UTC or local time
in either 24 or 12 hour formats.
IRIG Code Format
Reference “IRIG Standard Format A” on page 192. The level shifted, pulse width modulated, serial
formats of IRIG-B and IRIG-A are divided into three segments. The first segment encodes time of year
in binary coded decimal (BCD) notation. The second segment encodes control functions. This segment
is generally available for data of the user's choice. In the IRIG-B code output of Model XLi, this segment
encodes worst case time error flags as explained below. The IRIG-A output from Model XLi does not
include control functions. The third segment sometimes encodes time of day in straight binary seconds
(SBS) notation. Both IRIG-B and IRIG-A encode SBS on the Model XLi.
The three code segments are contained within one "frame". The frame length for IRIG-B is 1 second
long and contains 100 "elements" (pulses) each of which start every 10 milliseconds. The frame length
for IRIG-A is 1/10 seconds and contains 100 elements each of which starts every 1 millisecond.
An element may represent either a binary zero, a binary one, a reference marker or a position identifier.
A zero is 0.2 of the duration of an element, a one is 0.5 of the duration of an element and a position
identifier or reference marker is 0.8 of the duration of an element. A reference marker locates the