Filter
Top Products
7265 Programmer’s Manual 37
Copyright © 2004 TallyGenicom Chapter 3 ANSI Bar Codes
Bar Code Command
Sequences
Command Description
ESC [3t ENABLE BAR CODES
Enables Bar Codes with the characteristics set by ESC [(p1);(p2)…}.
ESC [3t selects Bar Code mode and
activates Bar Code printing.
Dec 27 91 51 116 Hex 1B 5B 33 74
ESC [0t CANCEL OVERSIZED/EXPANDED/BAR CODE MODES
Dec 27 91 48 116 Hex 1B 5B 30 74
SO
SHIFT OUT
Turns off bar code printing, then enters bar code mode again.
Dec 14 Hex 0E
SI
SHIFT IN
SI
turns bar code printing off.
Dec 15 Hex 0F