Filter
Top Products
4-17
Operations 4Operations 4
Operations 4Operations 4
Operations 4
TELEDYNE ANALYTICAL INSTRUMENTS
1. Enter set-up from the Analyze mode by pressing
SETUP.
2. Press SET to set up the logger.
3. Enter the authorization code by using the SELEC, UP
and DOWN keys. Then press ACCPT.
4. Press LOG for the logger functions. Press ESC to return
to the Analyze mode main menu.
5. Press CLEAR if you want to clear the current logger
data. Press SETUP to continue setting up the logger.
6. If you chose SETUP in step 5, use SELEC to choose
logger ON/OFF, the time period between samples, or
the mode of measurement. Then choose EDIT to
change the values. After you are finished, press ACCPT,
which will take you to step 4.
The choices for the logger chart sampling mode (MODE
=) are on the next page.
Logger Set-UpLogger Set-Up
Logger Set-UpLogger Set-Up
Logger Set-Up