Filter
Top Products
2.6
Installing the AC Power Adapter
Use the following procedures to connect the AC Adapter to the system:
c
Caution: Use only the AC Adapter supplied with the computer; other
adapters can damage the unit.
1.
Remove the AC adapter from the packaging. Connect the round coaxial
connector on the AC Adapter to the power receptacle on the left side
(rear corner) of the notebook as shown in Figure 2-7.
2. Connect the female side of the AC Power cord to the AC Adapter and
connect the male end to a grounded AC outlet.
2.7
Initial System Checkout
After you’ve installed all internal options and external cabling, you’re ready
for system checkout and software configuration.
To check out the system, set the power switch on the notebook to the On
position which initiates the notebook self test. During self test execution,
the computer checks the operation of all critical hardware including
memory and CPU (and displays copyright and version number data during
test execution).
AC Adapter
AC Power
(120VAC to 230 VAC,
50 to 60 Hz)
Figure 2-7 AC Adapter Installation
2-10
Installation