Filter
Top Products
Appendix H: SNMP MIB Support Datacryptor Ethernet User Manual
Page 102 THALES
Appendix H: SNMP MIB Support
In order to support organizations who utilize SNMP to monitor network devices and status, the
Datacryptor Ethernet product does provide a Simple Network Management Protocol Version 3
(SNMPv3) and Management Information Base II (MIB-II) interface.
The SNMPv3 implementation is based upon RFCs 1157, 1901–1910, 2576, 2578 – 2580, and
3411–3418. The MIB II interface is based upon RFCs 1213, 2011, 2013, 2096, 2665, 2863, and
3417. All MIB files provided with this product are SMIv2 compliant.
Because the Datacryptor Ethernet is a security device, the SNMPv3 implementation in the
Datacryptor Ethernet is more restrictive than specified in the standard RFCs listed above. In
general, we have disabled most of the SET operations in order to protect critical security
parameters, configuration items, and device attributes.
Where the device SNMPv3 implementation has deviated from a RFC specification, we have
provided an updated RFC MIB files reflecting those changes.
Supported MIBs are listed in the table below:
MIB Name Description
DC2K-MIB-R4 SMIv2 compliant MIB file containing Thales e-Security
enterprise specific values. This MIB is used as the parent for all
other MIB files, except the RFC MIB files.
Please see the supplied MIB file for specific details.
DC2K-MIB-ETHERNET SMIv2 compliant MIB file containing Thales e-Security
enterprise specific values for the Ethernet units.
Please see the supplied MIB file for specific details.
DC2K-TRAP-ETHERNET SMIv2 compliant MIB file containing Thales e-Security
enterprise specific trap values for the Ethernet units.
Please see the supplied MIB file for specific details.
DC2K-MIB-SONET SMIv2 compliant MIB file containing Thales e-Security
enterprise specific values for the SONET units.
Please see the supplied MIB file for specific details.
DC2K-TRAP-SONET SMIv2 compliant MIB file containing Thales e-Security
enterprise specific trap values for the SONET units.
Please see the supplied MIB file for specific details.