Filter
Top Products
Element Manager Reference Datacryptor Ethernet User Manual
Page 58 THALES
Cable detected: the types of cable connected to the unit.
Save: stores the current properties in a named file, which can then be loaded using the Load
button (for example, to restore the settings after a unit has been reset to factory defaults).
Load: loads saved properties from a named file. You can then examine, edit or save them, or
apply them to the current unit by clicking the Apply button.
Save changes on exit: tick this box to save the current properties to a named file when you
exit the program.
Auto Refresh: tick this box to re-load the current setting from the unit every n seconds, where
n is set by the adjacent control. Warning: This may cause large amounts of data to be
transferred from the unit under management and may degrade system performance.
The Save and Load buttons provide a convenient way to set up a number of similar units, as
well as a convenient way to keep backups of unit settings.