Filter
Top Products
Element Manager Reference Datacryptor Ethernet User Manual
Page 52 THALES
1. Click Finish to begin the commissioning process, which will take a few seconds.
2. When commissioning has completed, confirm that the Datacryptor unit's LEDs are
flashing (which indicates that the unit has been commissioned successfully). Check the
unit's LEDs (or get someone else to do so, if the unit is remote) and click Yes if they are
flashing.
3. The new CA and certificate can be seen in the Certificates tab of the Key Manager.
4. Once a unit has been commissioned, with the correct CA and Certificate it can be used
for the transfer of secure information.