Filter
Top Products
49
[802.11b] Group
[Channel]:
Set a channel for IEEE 802.11b.
The printer corrects channels that cannot be used due to country code settings.
Default 1
Range 1 to 14
[Baud Rate]:
Select the maximum transmission rate for IEEE 802.11b.
The transmission rate is adjusted to a value enabling communication by the communicating device.
Default 11 Mbps
Options 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
[802.11g] Group
[Channel]:
Set a channel for IEEE 802.11g.
The printer corrects channels that cannot be used due to country code settings.
Default 1
Range 1 to 13
[Baud Rate]:
Select the maximum transmission rate for IEEE 802.11g.
The transmission rate is adjusted to a value enabling communication by the communicating device.
Default 11 Mbps
Options
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps,
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
[Priority AP] Group
[Property]:
Select ANY SSID/priority AP.
Default 11 Mbps
Options
ANY SSID OFF, ANY SSID ON / Priority AP OFF,
ANY SSID ON / Priority AP ON / Other AP OFF,
ANY SSID ON / Priority AP ON / Other AP ON
[MAC Address 1] [MAC Address 2] [MAC Address 3] [MAC Address 4] [MAC Address 5]:
Set MAC addresses for access points that you want to connect preferentially.
The numbers indicate order of priority.
Connection to the MAC addresses is made in the order of descending priorities.
Use 12 characters from "0" to "F" to enter addresses.
Entries are not case-sensitive.
When no address is entered, you can disable the current settings.
[Authentication] Group
[(1) Connection Mode]:
Select the connection mode.
Default Infrastructure
Options Adhoc, Infrastructure
[(2) Encryption]:
Select the encryption scheme.
Displayed options depend on the [(1) Connection Mode] settings.
Default Disable
Options Disable, WEP40, WEP104, TKIP, AES
[(3) Network Authentication]:
Select the network authentication system.
Displayed options depend on the [(1) Connection Mode] and [(2) Encryption] settings.
Default Open System
Options Open System, Shared Key, WPA-EAP, WPA-PSK, WPA2-EAP, WPA2-PSK