Filter
Top Products
59
[Save Printer Info...]
Current printer information is obtained, and saved in a file.
When this button is clicked, the file selection screen is displayed. Select a file where the printer information
is stored, click [Save], then the processing is started. When Multi LAN is selected for the interface, a file is
created for each of the connected printers. The file name includes the address information in addition to
the specified file name.
When Multi LAN is selected for the interface, the [Printer List] screen is displayed to allow choosing the
printers of which information is obtained.
When the processing starts, the progress status screen is displayed. When the processing is completed,
the completion screen is displayed.
This function is executed only when the printer is in online mode and idle state.
The printer information is saved in one file, in the order of the maintenance counter, firmware version, and
parameter settings.
However, "ZERO FONT" is not saved.
[Data Logging...]
The print log is obtained from the printer, and saved in a file.
When this button is clicked, the file selection screen is displayed. Select a file where the print log is stored,
click [Save], then the processing is started. When Multi LAN is selected for the interface, a file is created
for each of the connected printers. The file name includes the address information in addition to the
specified file name.
When Multi LAN is selected for the interface, the [Printer List] screen is displayed to allow choosing the
printers of which print log is obtained.
When the processing starts, the progress status screen is displayed. When the processing is completed,
the completion screen is displayed.
This function is executed only when the printer is in online mode and idle state.
The print log is used for examining the commands when an error occurred.
[Maintenance Counter Clear]
Select the option to clear maintenance counter.
Default All Counter
Options
All Counter, Feed Distance (FEED), Print Distance (PRINT), Cut Count (CUT),
Others (other than FEED, PRINT, CUT)
[Clear...]
Selected maintenance counter is cleared to zero.
When this button is clicked, the following confirmation message is displayed.
When [Yes] is clicked, the processing starts.
When [No] is clicked, the processing is canceled.
When Multi LAN is selected for the interface, the [Printer List] screen is displayed to allow choosing the
printers of which maintenance counter is cleared.
When the processing starts, the progress status screen is displayed. When the processing is
completed, the completion screen is displayed.
The maintenance counter data display is updated after the maintenance counter clear is completed.
This function is executed only when the printer is in online mode and idle state.
[Parameter Clear]
[Destination]
Select the destination used after the parameter clear is performed.
Default Destination specified on the Printer Setting screen
Options JA, QM, CN