Filter
Top Products
85
General (2) Tab
Setup group Setup item Options or range Default
Feed -50.0 to +50.0 (mm) 0.0
Cut/Peef Off -50.0 to +50.0 (mm) 0.0
Back Feed -9.9 to +9.9 (mm) 0.0
Position
Adjustment
X-coordinate -99.5 to +99.5 (mm) 0.0
Thermal Transfer -20 to +10 0 Tone Adjustment
Direct Thermal -20 to +10 0
AUTO
[ESC] [LF] [NUL]
{ | }
Control Code
Manual
AUTO
Code 1 00～FF 1B
Code 2 00～FF 0A
Command
Code 3 00～FF 00
Disable Basic Interpreter
Enable
Disable
Disable
BASIC
Basic Trace
Enable
Disable
Printer Serial No. Displayed only when obtained. Blank Product
SHELL Disable Disable
Manual Set Reflective Sensor Threshold Select
Command Set
Command Set
Reflective Sensor Threshold 0.1 to 4.0 (V) 1.0
Manual Set Transmissive Sensor Threshold
Select
Command Set
Command Set
Sensor
Adjustment
Transmissive Sensor Threshold 0.1 to4.0 (V) 1.4
Drive Voltage (Take-up) -15 to 10 0 Ribbon
Adjustment
Drive Voltage (Feed) -15 to 10 0
Date Time Displayed only when obtained. Blank
Disable Battery Check
Enable
Disable
Batch
RTC
Renewal
Page
Batch
Disable System Mode Password
Enable
Disable
New Password 0000 to FFFF 0000
Password
Old Password 0000 to FFFF 0000